Ecofan 812 - AirMax Black and Nickel

Ecofan 812 - AirMax Black and Nickel :

The 812 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Base 121x82mm (4.75 x 3.25") - Height 248mm (9.75") excludes handle. The Ecofan 812 generates up to 150 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Ecofan 812 - AirMax Black and Brass

The Ecofan 812 - AirMax Black and Brass :

The 812 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Base 121x82mm (4.75 x 3.25") - Height 248mm (9.75") excludes handle. The Ecofan 812 generates up to 150 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Ecofan 802 - AirPlus Black and Nickel

Ecofan 802 - AirPlus Black and Nickel :

The 802 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Size: Base 132x75mm (5.25x3") - Height 270mm (10.75") from base to top of blade, excluding handle. The Ecofan 802 generates up to 150 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Ecofan 802 - AirPlus Black and Brass

The Ecofan 802 - AirPlus Black and Brass :

The 802 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Size: Base 132x75mm (5.25x3") - Height 270mm (10.75") from base to top of blade, excluding handle. The Ecofan 802 generates up to 150 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Ecofan 802 - AirPlus Black and Brass

Ecofan 802 - AirPlus Black and Brass :

The 802 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Size: Base 132x75mm (5.25x3") - Height 270mm (10.75") from base to top of blade, excluding handle. The Ecofan 802 generates up to 150 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Ecofan 800 Black and Nickel

Ecofan 800 Black and Nickel :

The 800 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C.

The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Base 100x75mm (4x3") - Height 233mm (9.25") from base to top of blade, excluding handle. The Ecofan 800 generates up to 100 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Ecofan 800 Black and Brass

Ecofan 800 Black and Brass :

The 800 Series Ecofan is a heat powered fan designed to circulate the warm air created by a wood-stove operating with normal surface temperatures of between 65°C and 345°C. The optimal running temperature of the wood-stove Ecofan is the same as the recommended safe operating temperature for wood-stoves of between 205°C and 345°C. The Ecofan generates it`s own electricity - so no need for batteries or mains power.

Increased Efficiency and Comfort:

Warm air is circulated directly into the living area rather than having most of the stoves heat rise immediately to the ceiling, thereby increasing the heating efficiency of your stove. Improved warm air circulation results in greater comfort and less fuel consumption. Many people use the Ecofan to to help combat dry air. This can be done by positioning the Ecofan behind a tray of water on top of the stove to boost the rate of evaporation.

Fuel Saving:

Testing carried out in collaboration with a leading Canadian university has proven that using an Ecofan results in fuel savings of up to 14%.

Easy Operation:

The Ecofan starts automatically and adjusts its speed with the stove temperature. As the stove heats up, the Ecofan runs faster to move more warm air into the room. As the stove burns down and cools, the Ecofan automatically shuts off.

Size:

Base 100x75mm (4x3") - Height 233mm (9.25") from base to top of blade, excluding handle. The Ecofan 800 generates up to 100 Cubic feet (of air) per minute.

Costs Nothing to Operate:

The Ecofan uses only the heat from the stove. The Ecofan is the most economical way to efficiently circulate warm air. It does not use any batteries and can be used where there is no electricity.

Honeywell SF450EN Carbon Monoxide Alarm

Honeywell SF450EN Carbon Monoxide Alarm :

The SF450EN is an easy to use and reliable self-contained Carbon Monoxide alarm. Designed for use in all domestic environments such as homes, caravans and boats. Batteries supplied and pre-fitted in alarm.

IT IS NOW PART OF UK BUILDING REGULATIONS FROM 1st OCTOBER 2010 THAT A (CO) ALARM IS FITTED IN TO A DWELLING WHERE A NEW OR REPLACEMENT FIXED SOLID FUEL APPLIANCE IS INSTALLED.

( Document J ) Building Regs 2010

GUARANTEE

The SF450EN has a 6 Year Guarantee

CONSTRUCTION

SF450EN has a superior electrochemical cell sensing technology Automatic sensor adjustment function ensures complete accuracy

APPROVAL

SF450EN is approved to EN50291:2001

INSTALLATION

The SF450EN should be installed in the same room as the appliance. On the ceiling at least 300mm from any wall or, if it is located on a wall, as high as possible (above doors and windows) but not within 150mm of the ceiling AND between 1m and 3m horizontally from the appliance.

MAINTENANCE

The SF450EN needs no maintenance for the full 6.5 year life of the alarm, with no sensors or any parts to replace. Batteries supplied and pre-fitted in alarm.

Register Plate (D) 1250mm x 600mm

Register Plate (D) 1250mm x 600mm :

Register Plates are used to seal off the base of the chimney.

This Register Plate is 1250mm x 600mm

USE THIS REGISTER PLATE WHEN VERMICULITE IS TO BE USED TO INSULATE THE FLUE.

APPLICATION

Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION

The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe.

INSTALLATION

The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

Register Plate (C) 1250mm x 600mm - 2 access holes

Register Plate (C) 1250mm x 600mm - 2 access holes :

Register Plates are used to seal off the base of the chimney.

This Register Plate is 1250mm x 600mm

It has TWO access hole.

It is suitable for 125mm and 150mm (5 and 6 inch) Black Stove Pipe.

DO NOT USE THIS REGISTER PLATE IF YOU ARE USING VERMICULITE TO INSULATE YOUR FLUE.

APPLICATION

Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION

The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe. This Register Plate has a special adapter suitable for installations which use either 125mm or 150mm diameter flue pipes.

INSTALLATION

The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

MAINTENANCE

It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. At the same time remove the Register Plates inspection hole cover plate(s) and hoover / sweep any debris that has fallen.

DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.

Register Plate (B) 1000mm x 400mm - 2 access holes

Register Plate (B) 1000mm x 400mm - 2 access holes :

Register Plates are used to seal off the base of the chimney.

This Register Plate is 1000mm x 400mm

It has TWO access hole.

It is suitable for 125mm and 150mm (5 and 6 inch) Black Stove Pipe.

DO NOT USE THIS REGISTER PLATE IF YOU ARE USING VERMICULITE TO INSULATE YOUR FLUE.

APPLICATION

Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION

The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe. This Register Plate has a special adapter suitable for installations which use either 125mm or 150mm diameter flue pipes.

INSTALLATION

The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

MAINTENANCE

It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. At the same time remove the Register Plates inspection hole cover plate(s) and hoover / sweep any debris that has fallen.

DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.

Register Plate (A) 800mm x 400mm - 1 access hole

Register Plate (A) 800mm x 400mm - 1 access hole

Register Plates are used to seal off the base of the chimney.

This Register Plate is 800mm x 400mm

It has ONE access hole.

It is suitable for 125mm and 150mm (5 and 6 inch) Black Stove Pipe.

DO NOT USE THIS REGISTER PLATE IF YOU ARE USING VERMICULITE TO INSULATE YOUR FLUE.

APPLICATION

Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION

The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe. This Register Plate has a special adapter suitable for installations which use either 125mm or 150mm diameter flue pipes.

INSTALLATION

The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

MAINTENANCE

It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. At the same time remove the Register Plates inspection hole cover plate(s) and hoover / sweep any debris that has fallen.

DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.

Chimney Notice Plate

Chimney Notice Plate

Chimney Notice plates are a Building Regulations requirement. They most be filled out and fixed near to the appliance or within a meter cupboard. 

Stove Thermometer

Stove Thermometer :

SAVE MONEY WITH A STOVE THERMOMETER

Ensure your stove is operating at the correct temperature by using this magnetic stove thermometer that attaches to your black stove pipe. If your stove is too cold then creosote deposits will form, if its too hot then you are wasting energy.

CONSTRUCTION

The Stove Thermometer is 2.5 inch Diameter (63mm). Its magnetic so attaches just above your stove on the Black Stove Pipe.

INSTALLATION

The stove thermometer attaches magnetically, directly to the metal flue pipe. Optimal location is at eye level, no less than 300mm (12 inches) above the top of the stove, where you can easily see it in the room.

Stove-Care Glass Cleaner (400ml aerosol) - single

Stove-Care Glass Cleaner (400ml aerosol) - single :

High quality stove glass cleaner, removes soot, tar and grease deposit with ease.

Apply as required on glass, wait a few minutes, wipe with a dry non streak cloth.

TO BE APPLIED WHEN APPLIANCE IS NOT IN USE

Stove-Care Spray Paint (400ml aerosol) - Metallic Black (single)

Stove-Care Spray Paint (400ml aerosol) - Metallic Black (single)

Stove-Care spray paint is a high quality fast drying, high temperature paint for use on wood, multi-fuel and gas stoves, furnaces, traditional cast iron cookers, cast iron chimineas and many other steel and cast iron products with in-service temperatures to 650°C. 400ml aerosol.