Senora SD1 | SD2 Replacement Glass

APPLICATION
High temperature heat resistant ceramic glass specifically manufactured to cope with temperatures in excess of 760°C.
Suitable for replacing glass in:

- Fireplaces
- Multi-fuel Stoves
- Wood burning stoves
- Ovens
- and a variety of other heat applications.

FITTING INSTRUCTIONS
Ensure suitable glass gaskets/seals are replaced before attempting to install replacement glass on your appliance.
Gently finger tighten the screws and washers to hold glass in place.

GENERAL NOTES
This product is of very high quality with extremely low thermal expansion properties, and as such, copes with excessive high temperatures from the appliance although not toughened.

CARE
Care should always be taken when fitting and handling glass as damage may occur when fitted incorrectly or over tightened.

WARRANTY
There are no guarantees on glass products.

Chimney Notice Plate

Chimney Notice plates are a Building Regulations requirement. They most be filled out and fixed near to the appliance or within a meter cupboard.

Glass Pack Firefox 12



Everything you need to replace your glass and seals in your stove.
Pack contains:-
Heat resistant glass, cut to the exact size of the door.
Ceramic fire rope cut to correct length and of the correct diameter to reseal the door of your stove.
Ceramic fire rope cut to correct length and of the correct diameter to hold the glass in place on your stove.
Specially formulised glue to stick the ceramic fire rope into place.
A length of rope sealing tape, this is used to stop the ceramic fibres from shredding.

Stove Thermometer

CONSTRUCTIONThe Stove Thermometer is 2.5 inch Diameter (63mm). Its magnetic so attaches just above your stove on the Black Stove Pipe.

INSTALLATIONThe stove thermometer attaches magnetically, directly to the metal flue pipe. Optimal location is at eye level, no less than 300mm (12 inches) above the top of the stove, where you can easily see it in the room.

Jig Replacement Glass

APPLICATION
High temperature heat resistant ceramic glass specifically manufactured to cope with temperatures in excess of 760°C.
Suitable for replacing glass in:
- Fireplaces
- Multi-fuel Stoves
- Wood burning stoves
- Ovens
- and a variety of other heat applications.

FITTING INSTRUCTIONS
Ensure suitable glass gaskets/seals are replaced before attempting to install replacement glass on your appliance.
Gently finger tighten the screws and washers to hold glass in place.

GENERAL NOTES
This product is of very high quality with extremely low thermal expansion properties, and as such, copes with excessive high temperatures from the appliance although not toughened.

CARE
Care should always be taken when fitting and handling glass as damage may occur when fitted incorrectly or over tightened.

WARRANTY
There are no guarantees on glass products.

Vermont Vigilant Replacement Stove Glass

APPLICATION
High temperature heat resistant ceramic glass specifically manufactured to cope with temperatures in excess of 760°C.
Suitable for replacing glass in:
- Fireplaces
- Multi-fuel Stoves
- Wood burning stoves
- Ovens
- and a variety of other heat applications.

FITTING INSTRUCTIONS
Ensure suitable glass gaskets/seals are replaced before attempting to install replacement glass on your appliance.
Gently finger tighten the screws and washers to hold glass in place.

GENERAL NOTES
This product is of very high quality with extremely low thermal expansion properties, and as such, copes with excessive high temperatures from the appliance although not toughened.

CARE
Care should always be taken when fitting and handling glass as damage may occur when fitted incorrectly or over tightened.

WARRANTY
There are no guarantees on glass products.

Register Plate (D) 1250mm x 600mm

Register Plate (D) 1250mm x 600mm

APPLICATION
Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe.

INSTALLATION
The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

Stove-Care Spray Paint (400ml aerosol) - Charcoal (single)

Stove-Care spray paint is a high quality fast drying, high temperature paint for use on wood, multi-fuel and gas stoves, furnaces, traditional cast iron cookers, cast iron chimineas and many other steel and cast iron products with in-service temperatures to 650°C. 400ml aerosol.

Glass Pack Morso Owl (3340)

Glass Pack Morso Owl (3340)

GLASS PACK
Everything you need to replace your glass and seals in your stove.
Pack contains:-

Heat resistant glass, cut to the exact size of the door.
Ceramic fire rope cut to correct length and of the correct diameter to reseal the door of your stove.Ceramic fire rope cut to correct length and of the correct diameter to hold the glass in place on your stove.
Specially formulised glue to stick the ceramic fire rope into place.
A length of rope sealing tape, this is used to stop the ceramic fibres from shredding.

Cannon Coalridge (Balance Flue) Replacement Glass

Cannon Coalridge (Balance Flue) Replacement Glass

Glass suitable for Cannon Stove - Model:Cannon Coalridge (Balance Flue)
Size:425 x 315 x 4 mm

 

APPLICATION
High temperature heat resistant ceramic glass specifically manufactured to cope with temperatures in excess of 760°C.
Suitable for replacing glass in:
- Fireplaces
- Multi-fuel Stoves
- Wood burning stoves
- Ovens
- and a variety of other heat applications.
 

FITTING INSTRUCTIONS
Ensure suitable glass gaskets/seals are replaced before attempting to install replacement glass on your appliance.
Gently finger tighten the screws and washers to hold glass in place.
 

GENERAL NOTES
This product is of very high quality with extremely low thermal expansion properties, and as such, copes with excessive high temperatures from the appliance although not toughened.
 

CARE
Care should always be taken when fitting and handling glass as damage may occur when fitted incorrectly or over tightened.
 

WARRANTY
There are no guarantees on glass products.

Jotul Bear Replacement Stove Glass

Glass suitable for Jotul Stove - Model:Jotul Bear
Size:202 x 202 x 4 mm

 

APPLICATION
High temperature heat resistant ceramic glass specifically manufactured to cope with temperatures in excess of 760°C.
Suitable for replacing glass in:
- Fireplaces
- Multi-fuel Stoves
- Wood burning stoves
- Ovens
- and a variety of other heat applications.

FITTING INSTRUCTIONS
Ensure suitable glass gaskets/seals are replaced before attempting to install replacement glass on your appliance.
Gently finger tighten the screws and washers to hold glass in place.

GENERAL NOTES
This product is of very high quality with extremely low thermal expansion properties, and as such, copes with excessive high temperatures from the appliance although not toughened.

CARE
Care should always be taken when fitting and handling glass as damage may occur when fitted incorrectly or over tightened.

WARRANTY
There are no guarantees on glass products.